.png)
Shida Komusho Pressure Reducing Valve Replacement: Technical Information Required for Quotation
Updated: Sep 7
Nichiboku's industrial Insights
Introduction
If you have an existing Shida Komusho Pressure Reducing Valve installed and need to replace it, Nichiboku can coordinate the technical review and quotation request from Japan.
To identify the appropriate replacement, please provide: (Shida Komusho pressure reducing valve replacement)
A copy of the original manufacturer’s drawing; and/or
The technical specification sheet of the existing valve
A clear photograph of the valve nameplate
The actual operating conditions shown below
Required quantity
Technical Information Required for Quotation: Shida Komusho Pressure Reducing Valve Replacement
The values shown below are provided only as a reference example based on a Shida Komusho drawing. They should not be considered the required specifications for your application.
Technical Parameter | Reference Example | Your Application |
Valve Type | Pressure Reducing Valve |
Body Material | SS400 |
Design Pressure | 4.0 MPa |
Inlet Pressure | 4.0 MPa |
Outlet Pressure | 0.8–1.7 MPa |
Design Temperature | 40°C |
Fluid | Air |
Connection Size — Inlet / Outlet | Rc 3/4″ / Rc 3/4″ |
Quantity: ______ pcs
** Values shown in blue are for reference only and do not define the specifications required for your application.
Shida Komusho Vacuum Safety Valve Replacement
The end user should provide the actual operating conditions of the installed pressure reducing valve so that the manufacturer can review the requirement and determine the appropriate replacement configuration.
Review Shida Komusho industrial valves through Nichiboku:
Japanese Industrial Products
Explore Nichiboku’s virtual catalogue of Japanese industrial equipment, sensors and replacement components for plant maintenance and industrial projects worldwide.
Comments