Shida Komusho Vacuum Safety Valve Replacement: Technical Information Required for Quotation

Sep 4

2 min read

Updated: Sep 7

Nichiboku's industrial Insights

Introduction

If you have an existing Shida Komusho Vacuum Safety Valve installed and need to replace it, Nichiboku can coordinate the technical review and quotation request from Japan.

To identify the appropriate replacement, please provide: (Shida Komusho Vacuum Safety Valve Replacement)

A copy of the original manufacturer’s drawing; and/or
The technical specification sheet of the existing valve
A clear photograph of the valve nameplate
The actual operating conditions shown below
Required quantity

Shida Komusho vacuum safety valve replacement poster with metal valve and quotation checklist on a light gray background. — Shida Komusho Vacuum Safety Valve with Threaded Connection: Reliable Industrial Replacement Solution.

Technical Information Required for Quotation

The values shown below are provided only as a reference example based on a Shida Komusho drawing. They should not be considered the required specifications for your application.

Technical Parameter	Reference Example	Your Application
Set Pressure	−80 kPa(g)
Closing Pressure	−70 kPa(g)
Inlet Pressure	—
Outlet Pressure	—
Design Pressure	FV to 0.2 MPa(g)*
Design Temperature	60°C
Fluid	Air + 80% Water Vapor
Required Capacity	24 kg/h
Inlet Connection / Size	NPT 1″ / 25A
Outlet Connection / Size	—

FV = Full Vacuum.

Quantity: ______ pcs ** Values shown in blue are for reference only and do not define the specifications required for your application.